Create strong bonds to all epoxies, polyester resins, metals and wood.Two-part epoxy resin that does not sag, run, or shrink. With a thick formula, FlexPoxy can fill large cavities in a single application. When cured, it remains flexible, making it a good choice for keel joint repairs. FlexPoxy creates a superior bond to all epoxies, polyester resins, metals and wood and can be sanded, machined, cut, filed, planed, drilled, tapped, or nailed, making it good for filling, filleting, forming, fairing, and fastening. The low odor formula is resistant to chemicals and is safe to use above and below the waterline. FlexPoxy can be molded and shaped during application and is easily tinted with paints and stains. FlexPoxy can be overcoated by most paints.Key FeaturesFor use above or below the waterlineWill not sag, run or shrinkCan be molded, shaped, machined, sanded, drilled or tappedBonds to most surfaces including fiberglass, wood, steel, aluminum and concreteApplicationFormulation: Two-part epoxyRecommended Usage: Filling, fairing and bonding applicationsCure Time: Pot life: 20-25 min.; To set: 3 hrs.; To cure: 16 hrs. (@ 77F)Color: Part A: Blue; Part B: Clear; Pink when mixedCleanup: 97 Epoxy Thinner, Model 284216; Xylol or denatured alcohol